Zhengzhou Lanshuo Electronics Co., Ltd
Zhengzhou Lanshuo Electronics Co., Ltd
Add to Cart
1. Advantage of induction melting furnace:
1.Ultra-small volume: Ultra-small volume,light weight,portable,saving 10 times the production space for customers.
2.Easy installation: Simple to install, installation can be done by unprofessional staff very easily and quickly.
3.Easy and safe operation: Easy and independent operation,safe and reliable. No high voltage, very safe for operating person.
4.Easy to change furnace crucible: The crucible is a kind of spare parts.But it is very convenient and easy to change furnace crucible for different material melting. There are two kinds of crucibles as below.The price of high density graphite crucible is higher than clay graphite crucible.There is a very big difference.The dump type furnace always goes with clay graphite crucible.
5.Higher reliability and lower maintenance cost.
6.High efficiency and energy-saving: Heating fast and uniform, high efficiency, good insulation effect, low power,energy-saving;
7.100% full load: A unique cooling circulation system, make sure that the equipment 24 hours of continuous work.
8.Equipped temperature system: The machine equipped the temperature control system, which can let you control the temperature going at real time.
9.Display important parameters: Display of heating power and heating current and oscillating frequency.The parameters can be changed conveniently by pressing arrow buttons.
10.Environmental: Almost no oxide layer, produced no exhaust, no waste-water is generated.
11.The types fault protection: About ten types fault protection and display of over-current,over voltage,water shortage and phase missing can provide higher reliability and durability.
12.Many different weight's mould to collect the melted metal.
2. Melting Capacity of small copper Induction Melting Furnace:
| ||||||||||||||||||||||||||||||||||||||||||||||||
3. Electric Small Copper Induction Melting Furnace Application:
4. Electric Small Copper Induction Melting Furnace Feature:
Furnaces are table-mounted and hand-operated. They are built with materials that provide exceptional structural strength and reduced weight, key factors in furnaces designed to be moved and poured by hand.
This reduction in furnace weight is a particularly important consideration in hand pouring operations. Their removable front and back inspection and access panels make Furnaces easier to maintain and cost less to repair than shell furnaces and aluminum frame furnaces. These furnaces have a strong, durable construction for long furnace life. Furnaces are ideal for use in prototype casting, small run casting, precious metal refining and casting, laboratory operations and wherever relatively small amounts of molten metal are needed.
5. Main technical parameters of LSZ series Small Copper induction melting furnace:
| Model | Power | Input current | Voltage | Oscillation frequency | Connect- ing wire | Control switch |
| LSZ-15 | 15kw | 18A | 3-phase 380 V, 50/60 Hz | 1-15KHz | 10mm2 | 3*40A |
| LSZ-25 | 25kw | 36A | 10mm2 | 3*60A | ||
| LSZ-35 | 35kw | 57A | 16mm2 | 3*80A | ||
| LSZ-45 | 45kw | 80A | 35mm2 | 3*120A | ||
| LSZ-70 | 70kw | 110A | 50mm2 | 3*150A | ||
| LSZ-90 | 90kw | 140A | 75mm2 | 3*225A | ||
| LSZ-110 | 110kw | 160A | 90mm2 | 3*225A | ||
| LSZ-160 | 160kw | 240A | 120mm2 | 3*300A |
The scope of melting the metal is as below.
A.smelting for precious metals, such as gold, sliver, copper scrap melting;
B.smelting for iron, steel, copper, platinum, aluminum and other noble metals;
C.smelting for ferrous and non ferrous metals;
D.smelting for alloys;
E.smelting for metal rods;
F.other smelting work for metal product.